The RID Gearbox Drive Self-Priming Flexible Impeller Pump is characterised by its close-coupled design to a geared motor. This pump excels at handling medium to high viscosity, shear-sensitive, and abrasive fluids with viscosities up to 50,000 cPs. Additionally, the pump delivers pulsation-free pumping for shear-sensitive liquids, reversible operation, and can self-prime up to 25mm (model dependant). The RID Series can be supplied trolley-mounted, with or without baseplates, with or without control panels and wired dry-run protection. All models are 3-phase with Manual or Spring Loaded By-Passes available on request. Furthermore, FDA-approved EPDM and NBR impellers are available for enhanced sanitation.
Typical applications for our Inverter Drive Self-Priming Flexible Impeller Pump:
Overview
Features & Benefits
Specifications
Variations
Due to the close-coupled design of the RID Self-Priming Flexible Impeller Pump, the rotation of the pump head into different porting configurations can be taken advantage of, a possible drawback with the GR series.
The RID MAXI DOUBLE 2Q doubles the flow capability of the RID MAXI 80, whereas the RID MAXI DOUBLE 2H doubles the head capability.
Units can be supplied with or without baseplates, trolley mounted and with or without control panels and wired Dry Run Protection. All models are 3 Phase. Manual or Spring Loaded By-Passes are also available on request.
Voltages:Â 230 & 400V (3 Phase)
Speeds:Â 235, 300, 350, 470, 600 & 700 rpm single & dual speed (235-470, 300-600 & 350-700 rpm)
Counter Connections:Â All pumps are supplied with Garolla Fittings as standard however a wide range of connection & counter connection types are available upon request.
- Design:Â Close-coupled design to a geared motor makes it ideal for medium to high-viscosity or shear-sensitive fluids. Additionally, rotation of the pump head into different porting configurations is possible owing to the close-coupled design
- Performance:Â RID MAXI DOUBLE models double the flow and pressure capabilities for increased performance parameters
- Configuration Options:Â Available with or without baseplates, trolley-mounted, with or without control panels. Pump heads are also available in Stainless Steel AISI 316 or 304 materials, with options for different connections and orientations available
- Mechanical Seals:Â Ceramic/Graphite/NBR as standard, with Tungsten Carbide/Tungsten Carbide/Viton & SiC/SiC/EPDM options available on request
- Flexibility:Â Various connection types and sizes are available, as well as manual and spring-loaded bypasses available on request
| Max Flow (l/min) |
730 l/min |
| Max Pressure (m) |
32m |
| Solids Passage (mm) |
3, 5, 10, 15 & 25mm |
| Voltages |
12 & 24V DC
110, 230 & 400V (MF & TF) |
| No. of Speed Settings |
1 or 2 |
| Speeds (rpm) |
470, 600, 900, 1400 |
| Pump Heads |
AISI 304
AISI 316 |
| Impellers |
Natural Rubber (NR)
Nitrile (NBR)
Neoprene (CR)
EPDM
Silicone (VQM) |
| Shaft Sealing |
Bi-Directional Single Mechanical Seal
Ceramic / Graphite / NBR (Std.)
SiC/SiC/EPDM
Tungsten Carbide / Tungsten Carbide / Viton etc… |
| Connections |
BSP M
BSP F
Garolla
DIN 11851
Macon
Tri-Clamp
SMS
BSM / RJT
Friederich |
- Manual or Spring-Loaded Bypasses
- Alternative Port Sizing
- Counter Connections (Hose Fittings & Adaptors)
- Dry-Run Protection
- Trolleys & Mobile Packages
- Control Panels & Variable Speed Drives
