PUMPS
BRANDS
| Model | Max Capacity (m³/hr) | Max Pressure (m) |
|---|---|---|
| VA-INV | 72 | 40 |
| Model | Max Capacity (m³/hr) | Max Pressure (m) |
|---|---|---|
| VA-INV | 72 | 40 |
How does a VA & INV Flexible Impeller Pump work?
What is the difference between a Centrifugal and a Flexible Impeller Pump?
How does this differ from other products on the Tapflo website?
What applications are suited to this pump?
Are these pumps self-priming?
Can this pump run dry?
Is this pump suitable for abrasive or hazardous chemicals?
Tapflo UK is proud to be a partner of Liverani, a leading Italian manufacturer, supplying us with highest-quality Flexible Impeller Pumps and Liquid Ring Pumps.
Our VA & INV Flexible Impeller Pumps are self-priming pumps that are ideal for transfer, filling, dosing and filtration applications that require variable speed control. These pumps can handle not only clean, light fluids, but also viscous, solid-laden slurries, with solids passage capabilities up to 25mm. The VA Series offers the capability to adjust its speed by its integral mechanical variator which changes the mechanical output speed of the gearbox. With the INV Series, you'll achieve the widest and most accurate flow control as you can infinitely vary the speed of the motor between its minimum and maximum speed points using the pre-wired and calibrated inverter panel.
Typical applications for our VA & INV Flexible Impeller Pumps:
Download Brochure
Our VA Series is characterised by its ability to adjust its speed by its integral mechanical variator, which changes the mechanical output speed of the gearbox. Flow control isn’t as accurate as the INV series. However, it provides a decent flow range for applications where precise flow control isn’t necessarily required. Speed adjustment must be done whilst the pump is at a standstill, not during operation.
All VA series units are 3 phases as standard.
Our INV Series provides the widest and most accurate flow control as you can infinitely vary the speed of the motor between its min and max speed points by using the pre-wired and calibrated inverter panel. As with the RID series, the INV MAXI DOUBLE 2Q doubles the flow of the INV MAXI 80 & INV MAXI DOUBLE 2H doubles the head.
As standard, the INV Series is supplied trolley mounted and with a CE Control Panel with an integral inverter, remote control on a 15 m cable with on/off/reverse & Speed Adjustment, dry-run protection & supplementary 24V NC Contactor for wiring to any additional fluid accessories such as Flow Meters, Pressure Switches or Transducers etc.
The feeding supply for the INV series can be either 230V single phase (up to 2.2 kW) or 230-400V three-phase.
Our VA Series is characterised by its ability to adjust its speed by its integral mechanical variator, which changes the mechanical output speed of the gearbox. Flow control isn’t as accurate as the INV series. However, it provides a decent flow range for applications where precise flow control isn’t necessarily required. Speed adjustment must be done whilst the pump is at a standstill, not during operation.
All VA series units are 3 phases as standard.
Our INV Series provides the widest and most accurate flow control as you can infinitely vary the speed of the motor between its min and max speed points by using the pre-wired and calibrated inverter panel. As with the RID series, the INV MAXI DOUBLE 2Q doubles the flow of the INV MAXI 80 & INV MAXI DOUBLE 2H doubles the head.
As standard, the INV Series is supplied trolley mounted and with a CE Control Panel with an integral inverter, remote control on a 15 m cable with on/off/reverse & Speed Adjustment, dry-run protection & supplementary 24V NC Contactor for wiring to any additional fluid accessories such as Flow Meters, Pressure Switches or Transducers etc.
The feeding supply for the INV series can be either 230V single phase (up to 2.2 kW) or 230-400V three-phase.
| Max Capacity (m³/hr) | 72m³/hr |
| Max Pressure (m) | 40m |
| Max Temperature (°C) | 100°C |
| Max Viscosity (cP) | 50 cP |
| Self-Priming | Up to 6m |
