Our Industrial Self Priming Centrifugal Pump is the ideal solution for handling varied fluids, including waters, mild chemicals, solvents and partially solids-laden fluids up to 6mm. Manufactured from Stainless Steel AISI, this pump ensures superior corrosion resistance and enhanced mechanical strength, ideal for a range of Industrial applications. Featuring an open impeller and BSPT thread connection (flanged connections available on request), these robust pumps reduce the risk of leaks and ensure compatibility with other components in your pump. Additionally, ATEX certification is available for use in hazardous environments.
Typical applications for our Industrial Self Priming Centrifugal Pump:
Overview
Features & Benefits
Specifications
Our Industrial Self Priming Centrifugal Pump (CTS-I) is suited for transferring or offloading waters, mild chemicals, solvents and partially solids-laden fluids. As well as being typically used for tank to tank transfer applications, our Self Priming Centrifugal Pump is used for pressure boosting, dispensing, loading and offloading, tank cleaning, batching and metering, when used in conjunction with some of our control accessories. The CTS-I Pump range is suitable for a wide variety of applications where a suction lift is required or for pumping highly aerated fluids within the Industrial, Food, Beverage and Pharmaceutical industries. And as they can be ATEX rated, they can also be used in hazardous zones.
Standard Single Mechanical Seals are provided with a range of face materials, Ceramic/Graphite/SiC and O-Rings are available in EPDM/FKM/FFKM or FEP or alternatively, the seal can be provided with an OP-Ring (Square O-Ring). This increases the friction between the O-Ring and the back casing and therefore lowers the chances of the static parts of the seal from sticking together.
Lubricated & Externally Quenched Mechanical Seals can also be provided upon request and are ideally used when there is the potential for dry running or where there is a chance for the product to solidify or crystallise. An oil pot is connected to the seal chamber and continually lubricates the seal during operation. SAE Grade 20 oil is recommended however you must use a fluid compatible with the pumped medium and materials within the pump.
- Open impeller
- Suction lift capabilities up to 4.5m
- Self-priming
- Easy installation and simple maintenance requirements
- Well-suited to handling highly-aerated liquids
- Simple and compact design
- Superior mechanical strength and corrosion resistance
- Available in hygienic executions for enhanced sanitation requirements
| Drive Type |
Electric |
| Flow Rate |
up to 58 m³/hr |
| Pressure |
up to 40m |
| Material |
Stainless Steel AISI 316L |
| Self-Priming |
Yes |
| Solids Handling |
up to 6mm |
| Viscosity |
0-200 cSt |
Materials & Data
| Casing |
Stainless Steel AISI 316L, Glass Blasted |
| Impeller |
| Mechanical Seal |
Single Ceramic / Graphite (Std.), SiC / SiC or SiC / Graphite, Optional with Lubrication or Flushing |
| O-Rings |
EPDM (Std.), FKM, FEP / Silicon or NBR |
| Motor |
IP55; IEC frame B34; Available with ATEX cat 2 or 3; Eex e or Eex d |
| Pressure Rating |
100 meters (PN10) |
| Temperature |
Max 90°C |
| Viscosity |
Max ~200 cSt |
| Particles |
Max diameter is 6 mm (std open impeller); bigger if soft particles |
CTS-I Industrial Pump Connection Options
| Connections Dimensions |
| Model |
BSPT M (Std.) |
DIN 2633 (PN 16) |
ANSI 150 |
| Ra |
Ri |
Ra |
Ri |
Ra |
Ri |
| CTI C |
1½” |
1½” |
DN 40 |
DN 40 |
1½” |
1½” |
| CTI D |
2½” |
2” |
DN 65 |
DN 50 |
2½” |
2” |
| CTI E |
2½” |
2” |
DN 65 |
DN 50 |
2½” |
2” |
