PUMPS
BRANDS
The TPUK PS1 Diaphragm Pump Pressure Switch is a versatile device used to convert pneumatic signals from your Diaphragm Pump into electrical signals that can be used to monitor the operation of your pump, track its performance and implement preventative maintenance routines.
Download Brochure
Tapflo UK’s TPUK PS1 Low-Pressure VFC Pressure Switch is used to convert pneumatic signals received from a Diaphragm Pump into electrical closure or breaks that can be used to feedback into an electrical control system such as a PLC or BMS. It can also be used to monitor the stroke frequency of the pumps which therefore provides insight into the operation and health of the pump and also enabling a preventative maintenance regime. A stroke to volt free contact (VFC) is available for integration with PLC systems. Simply connect to any Diaphragm Pump via the air exhaust muffler to monitor the pump strokes. TPUK-PS1 must be combined with the muffler type TPUK-MU.
Tapflo UK’s TPUK PS1 Low-Pressure VFC Pressure Switch is used to convert pneumatic signals received from a Diaphragm Pump into electrical closure or breaks that can be used to feedback into an electrical control system such as a PLC or BMS. It can also be used to monitor the stroke frequency of the pumps which therefore provides insight into the operation and health of the pump and also enabling a preventative maintenance regime. A stroke to volt free contact (VFC) is available for integration with PLC systems. Simply connect to any Diaphragm Pump via the air exhaust muffler to monitor the pump strokes. TPUK-PS1 must be combined with the muffler type TPUK-MU.
| Air Pressure, Bar (G) | 20-80 meters | |||
| Permissible Fluids | Air, Inert Gases & Liquids | |||
| Adjustment of Switching Pressure, Bar (G) | 20-80 meters | |||
| Hysteresis | @ 10 meters | @ 20 meters | @ 40 meters | @ 60 meters |
| ≤5 meters | ≤6 meters | ≤8 meters | ≤10 meters | |
| Mechanical Life | 106 | |||
| Ambient Temperature Range, ºC | -5 to 40 | |||
| Breaking Capacity, V Resistive | 5A – 220-230V | |||
| Wire Cross Section | 0.75 mm2 | |||
| Standard Electrical Contact | V4 83 170 4 I W2 | |||
| Signal Cable (not included) | Circular, flexible OD = Ø5mm – Ø13mm | |||
| Pneumatic Connection | 4mm Push Fit | |||
| Weight (g) | 485 | |||
| Dimensions (mm) | 122 x 160 x 110 | |||