PUMPS
BRANDS
The CPC-ZA Sanitary Self-Priming Centrifugal Pump Series is the Self Priming variant of the CPC series. Its self-priming capabilities make it ideally suited for pumping liquids with entrained air and gases and where suction lift is required, such as CIP return or Truck Unloading.
Like the CPC Series, this range consists of 4 set sizes, CPC 160-210-260-310, with a capacity range of up to 300 m³/hr & 9 Bar in 50 Hz and 350 m³/hr & 13 Bar in 60 Hz. All liquid contact parts are manufactured from cast Stainless Steel AISI 316L or AISI 316L Mo Ni or Hastelloy C22 upon request for increased corrosion resistance with a surface roughness of <0.8 (<0.5 on request).
The CPC-ZA Sanitary Self Priming Centrifugal Pump is fitted with either open or star impellers, which are dry-mounted to the shaft by means of O-Rings and are also equipped with pressure relief holes to ensure optimal cleaning of the shaft seal and chamber. The O-Rings ensure that there is minimal liquid contact with the shaft whilst cleaning the contact faces at the same time. There are minimal clearances between the impeller and the back casing to ensure high efficiencies and pressures whilst retaining its solids-handling ability up to 10 mm. Units can be supplied close coupled in KAM, KAV & KAC designs with B3 or B5 motors or pneumatic, diesel driven or hydraulic motors in their IG & IGH forms. Various Mechanical Sealing & O-Ring options, drain connections and heating jackets are available on request.
The CPC-ZA Sanitary Self-Priming Centrifugal Pump Series is the Self Priming variant of the CPC series. Its self-priming capabilities make it ideally suited for pumping liquids with entrained air and gases and where suction lift is required, such as CIP return or Truck Unloading.
Like the CPC Series, this range consists of 4 set sizes, CPC 160-210-260-310, with a capacity range of up to 300 m³/hr & 9 Bar in 50 Hz and 350 m³/hr & 13 Bar in 60 Hz. All liquid contact parts are manufactured from cast Stainless Steel AISI 316L or AISI 316L Mo Ni or Hastelloy C22 upon request for increased corrosion resistance with a surface roughness of <0.8 (<0.5 on request).
The CPC-ZA Sanitary Self Priming Centrifugal Pump is fitted with either open or star impellers, which are dry-mounted to the shaft by means of O-Rings and are also equipped with pressure relief holes to ensure optimal cleaning of the shaft seal and chamber. The O-Rings ensure that there is minimal liquid contact with the shaft whilst cleaning the contact faces at the same time. There are minimal clearances between the impeller and the back casing to ensure high efficiencies and pressures whilst retaining its solids-handling ability up to 10 mm. Units can be supplied close coupled in KAM, KAV & KAC designs with B3 or B5 motors or pneumatic, diesel driven or hydraulic motors in their IG & IGH forms. Various Mechanical Sealing & O-Ring options, drain connections and heating jackets are available on request.
| Max Capacity | 350 m³/hr |
| Max Pressure | 130 meters |
| Max Viscosity | 500 cPs |
| Max Temperature | 150ºC (higher upon request, special execution) |
| Max Suction Lift | 6 m |
| Max Solids Passage | 10 mm – Model and Impeller specific |
| Impeller | Open or Star |
| Connections | 1.5” – 6” (DN40 – 150) |
| Connection Types | Couplings: DIN11851, DIN11864-1, SMS1145 Flanges: EN1092-1, DIN11864-2, ANSI Tri-Clamps: ISO2852, DIN32676, DIN11864-3 |
| Shaft Sealing | Single, double quench/flush, Inner and outer, EHEDG. according to DIN24960 |
| Sealing Materials | carbon/CrM, carbon/SiC, SiC/SiC, Tc/Tc |
| Elastomer Materials | EPDM, Viton, NBR, Teflon, KALREZ, e.g. according to FDA |
| Wetted Parts | AISI 316L (AISI 316L Mo Ni or Hastelloy C22 upon request) |
| Surface Roughness | <0.8 Micron (Std.), <0.5 upon request |
| Drives | Standard: IEC, IE2, B3/B5, IP55, isol cl. F, PTC Optional: IE3, ATEX, noise reduction, Hydraulic, Pneumatic, Diesel Driven |
