Tapflo UK is proud to offer our High-Pressure Peristaltic Pump suitable for high-pressure applications. Ideal for handling fragile and shear sensitive fluids. The Pump has been designed with an easy dismantling operation in mind, meaning minimal downtime and ease of use for operators. The pump features a hose manufactured from high-quality compound rubbers that are reinforced with braided polyamide layers to handle the technology’s use of compression. Our hoses last approximately 30% longer than other hoses on the market.
To protect the bearing of the gearbox against penetration of the lubricant or the pumped liquid we fit a lip seal around a hard shaft ring. If the hose ruptures, the pumped product damages the seal instead of penetrating the gearbox. Our casting is also fitted with a Leakage Channel, which must be kept open to the atmosphere.
The PT Peristaltic Pump Series employs a Vecobloc system which is very easy to dismantle. Done by unscrewing an Expandable Hub. Many of our competitor’s pumps have complex assemblies which means that wheel dismantling is often not possible in situ or by the customer.
The PT Peristaltic Pump is ideal for high-pressure transfer, metering and dosing applications of low or high viscous products. Typical industries and applications include:
Food & Beverage: Beer Yeast, Olive Oil, Wine, Egg, Milk, Yoghurts, Cake Dough, Mash Potato, Tomato Sauce
Paint: Water-based paint, Acrylics, Ink, Pigments
Pharmaceutical and Cosmetics: Chemical dosing, Shampoo, Syrups
Chemical and Petrochemical: PVDF Latex, Alcohol, Soap, Non-aromatic Solvents
Pump and Paper: Latex, Kaolin, Paper Waste Sludge
Ceramics: Filter press feeding, Plaster, Light Concrete, Cement Flooring
Surface Treatment: Abrasive waste fluids, Acids, Alkalis
Anaerobic Digestion: Digestate, Waste Sludge
Agricultural: Manure, Fertilizer, Sugar Mills, Molasses, Liquid Sugar
Tapflo’s High Pressure Peristaltic Pump is typically used for transfer applications of abrasive, viscous, solids laden and corrosive fluids where a reliable and robust pump that offers high pressure and high flow rates is required. The PT Peristaltic Pump range is ideal for accurate control and can achieve pressures up to 15 Bar. We have combined the best materials with smart design solutions in order to maximise running time and minimise service intervals.
The principle of operation of the pumping action in the PT Peristaltic Pump is achieved by pinching a circular loop of rubber tube with two diametrically opposed rotating shoes. Due to the rotational movement, the fluid in the tubes is pushed ahead of each wedge. When each wedge reaches the end of the loop, the hose is released, and the wedge rotates to the start of the loop to begin a new cycle. As the wedge releases the reinforced tube, it immediately returns to its original shape, thereby ensuring positive suction and priming. Additionally, solids in suspension are never damaged by the rotating shoes as the shoes either force the solids forwards or backwards, never trapping them. This construction of the pump makes it a smart and effective choice for a wide range of pump applications.
|Capacity||Up to 150 m³/hr|
|Viscosity||up to 60’000 cPs|
|Fluid Temperature||Up to 135ºC|
|Differential Pressure||Up to 15 Bar|
|Max Solids Passage||Up to 30 mm|
|Continuous Use||Intermittent Use||Occasional Use|
Minimum 1 hr Stop after 2 hrs use Maximum 1 Hr / Day
The PT Peristaltic Pump series is available in 21 different sizes:
|Type||10 rpm||20 rpm||40 rpm||60 rpm||80 rpm||100 rpm||120 rpm||140 rpm|
|PT 05 (3 Lobe)||3.4||6.8||13.6||20.4|
|PT 10 (3 Lobe)||10||20||40||60|
|Type||10 rpm||20 rpm||30 rpm||35 rpm||40 rpm||45 rpm||50 rpm|
Tapflo only utilises the highest quality compound rubbers which are reinforced with 2 – 6 layers of braided polyamide and an outer layer conforming to the strictest tolerances to ensure perfect and repeatable compression every time. For the Hose Liner, 7 Materials are available:
Tapflo’s PT Peristaltic Pumps score on all counts.
PT Peristaltic Pump series scores on all counts:
PT Peristaltic Pump series score on all counts:
Our High Pressure Peristaltic Pump range is a great choice for a number of high and low-pressure applications for the Industrial and Hygienic sectors. Our expert sales team will help you find the best pump to suit your application and advise on any accessories you may need, so give us a call today!
Give us a call now:
Search our pump support articles:
Tapflo UK bring a wealth of knowledge and passion to the pump industry, from humble beginnings twenty years ago to a market leader for the supply of industrial process pumps today.
We pride ourselves on service and response times, going above and beyond to service the needs of our ever growing customer base.
Tapflo Group is an independent, family-owned, European manufacturer and global supplier of Industrial Pumps that has been operating for 40 years.
We are a leading manufacturer of Air Operated Diaphragm Pumps, Centrifugal Pumps and other industrial process equipment, operating across 75 countries.
Tapflo UK has been operating since 1998, now working nationally with end-users and pump distributors. We offer a wide pump portfolio to the UK for almost any application and installation, including bespoke pumping systems designed by our in-house Engineering Team.