Vertical Multistage Pumps

EVM

Applications:
CAST IRON / AISI 304 / AISI 316
New vertical multistage centrifugal pumps which come in various versions: cast iron (EVMG),AISI 304 stainless steel (EVM), AISI 316 stainless steel (EVML) and WRAS-approved (EVMW). Reliable, quiet and easy to maintain.
They come with different numbers of stages and in a different sizes to meet individual capacity and head requirements. Suitable for municipal, Industrial and agricultural applications e.g. Fire fighting systems, pressure boosting (WRAS approved) water treatment plants, irrigation, hot and cold water movement for heating systems, cooling and air conditioners, especially suitable for boiler feed due to their sturdy construction.
All the new EVM pumps can be coupled with standard IEC motors.

The new vertical multistage pumps conform to directive 94/9/EC on ATEX equipment (belonging to Group II, Category 2).

The splined shaft features high mechanical strength.

The casing rings are floating types and easy to replace.

Technical Brief:
Asynchronous 2 poles motor
Insulation class F
Protection IP55
1~230V ± 10% 50Hz (up to 2,2kW) 3~230/400V ±10%
50Hz (up to 4kW included) 3~400/690V ±10% above 5,5 kW

MULTIGO

Applications:
Inox
Low noise Vertical Multistage Pump, the motor is cooled by pumped liquid, whilst simultaneously reducing the noise levels as the liquid passes around the motor within a water jacket. The double mechanical seal with interposed chamber containing lubrication fluid ensuring long life and reliability.
Suitable for booster sets, water features and irrigation systems. This pump is also suitable for installations where the pump is required to run under flood conditions. Supplied with 5 mts. cable length
type HO7 RNF.

Technical Brief:
Asynchronous 2 poles motor cooled by the pumped liquid
Insulation class F
Protection degree IP68
1~230V ± 10% 50Hz, 3~400V ± 10% 50Hz
Permanent split capacitor and automatic thermal overload protection for single-phase version
Thermal protection to be provided by the user for three-phase version DNA- DNM 1”1/4

CVM

Applications:
CAST IRON - PPO
Vertical centrifugal multistage pumps suitable for pressure boosting systems, washing plants, water treatment plants (filtrations), water supply systems, irrigation and general clean water pumping.

Technical Brief:
Asynchronous 2 poles motor
Insulation class F
Protection degree IP44
1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz
Permanent split capacitor and automatic thermal overload protection for single-phase version
Thermal protection to be provided by the user for three-phase version
DNM 1”1/4 – DNA 1”1/4