Eccentric screw pumps model series M

This pump model series was developed especially for the beverage industry. The pumps are equally suitable for the promotion of mashes, as well as fruit wine, yeast, wine and fruit juices.

The following outfit is standard:
• Hollow rotor, stator is harmless to edibles
• By-pass adjustment with angle valve (made of rust-proof stainless steel)
• Screw thread connection according to DIN 405/11851
• Undercarriage made of rust-proof stainless steel
• All pump parts that come into contact with the conveyed substance are made out of rust-free stainless steel 304/4301 or 316/4404
• Drives according to description with switch 230/400 V, 50 Hz

Special models with other screw threat connections or drives with different voltage/frequency are also available.

KIESEL Model series M eccentric screw pumps are ideal universal pumps for wineries, fruit juice pressing houses, breweries and distilleries.

Entire stone fruits, deberried and non-deberried grape mashes, yeast, draff, wine, cider, and concentrates are propelled along easily.

Eccentric screw pumps model series TP
Submersible pumps, tank pumps, keg pumps

This model series is used for pumping high-viscosity products out of tanks, kegs and containers, which can not be vacuumed out otherwise, for example: concentrates, marmalade, viscous products up to 200,000 mPas.

The product fixing is due to the following:
• Wall racks
• Tank lids
• Crane or balance mounting

Depending on the desired application conditions, different pump drives are available, for example: variable speed gear, flame-proof drives and drive motors with frequency converter. Two-staged stators and rotors are used for higher pumping pressures up to 12 bar.

Eccentric screw pumps model series B
Distilled mash pumps

The model series B encompasses specially developed pumps for fruit distillery. Due to extremely high eccentricity of the rotor, output room between the rotor and stator is especially large dimensioned, in order for the stone fruit mash to be meticulously handled.

All rotors are provided with a screw thread connection for the mount of a supply screw. The input area of the pump is outfitted with a 90s mash screw thread, in order to be able to easily attach a mash input funnel.

KIESEL Distillery Pumps are ideal for distilleries. All mediums would be sparingly pumped without problems. The hollow space between the rotor and stator stays the same size. They are "pushed" during pumping by the vacuum and pressure side. Thus, the transported material will not be smashed and fruit stones will not be damaged.

Eccentric screw pumps model series FT
Pumps with a large rectangular funnel opening and feeding screw

The model series FT is designed to promote products with a high amount of solid pieces, mash, yeast and filter cake without any problem. This model series of pumps is used as a high consistency pump with a built in funnel and as a liquid pump with a closed funnel and screw thread connection.

Eccentric screw pumps model series FTF
Flat mash pumps

KIESEL Flat mash pumps FTF are specially constructed for use under
de-stemming machines, graters, or mills. The following characteristics are combined in this model series:

Flat funnel – low pour height of the de-stemming machine – hollow rotor with high eccentricity – vibration-free pump characteristics – slow speed – particularly suitable product promotion control by way of level sensor.

Transported material:
• De-stemmed and stemmed grape mashes
• Dripped-off grape mashes
• Whole grapes
• Berry, stone fruit, seed fruit mashes

The KIESEL Flat mash pumps model series FTF are specially constructed for the tight space under de-stemming machines, graters or mills. Order a large feeding-screw and enclosed, wear-free joint.