PP & PVDF Immersion Centrifugal Pump

CTV PP PVDF

PP & PVDF Immersion Centrifugal Pump

Compare

Description

WHAT IS THE PP & PVDF IMMERSION CENTRIFUGAL PUMP FOR?

The PP and PVDF immersion centrifugal pump are ideally suited for most types of high corrosive chemicals in the use with high temperatures. In PP the pump is ideally suited for most types of chemicals at temperatures up to 70°C such as pickling baths and acid degrease solutions.

In PVDF the pump has a superior chemical and mechanical resistance. Ideal with hot acids up to 100°C, for example, hot hydrofluoric acid.

PP & PVDF Immersion Centrifugal Pump Design Features & Benefits

Tapflo’s innovative design philosophy has been applied to the CTV range resulting in a simple yet reliable pump to meet with the requirements of the applications it caters for. Subsequently it enables them to be maintained and troubleshot in a limited time frame. This results in very short down times and extremely low maintenance cost. In fact, in many cases once installed these pumps are maintenance free!

 

 

Capacity Range

The CTV units are available with 2 pole motors and capable of a wide envelope of capacity, detailed as follows:

PP & PVDF Units Capacity range

 

PP & PVDF Units
Pump Size 25-9 25-10 25-11 25-11.5 32-8.5 32-10 32-12.5
Max Capacity, m³/hr 10.2 13.2 15.6 18 19.8 24 27
Max Head, m 10 14 16 19 10 17 23
Motor Power, kW 0.55 0.75 1.1 1.5 1.1 1.5 2.2
Outlet ø, BSP 1” 1” 1” 1” 1¼” 1¼” 1¼”

 PP & PVDF Dimensions
Dimension CTV 25 CTV 32
A 285
B 200
E 85
F 56
G 95
H 1” 1¼”
J 25
K 419
L 123 126
M 60
N 1” 1¼”
Motor Power D I
0.55 kW 196 213
0.75 – 2.2 kW 214 267

PP & PVDF Immersion Centrifugal Pump Spare Parts
 Spare Parts, PP & PVDF Pumps
Pos. Description Qty Material
10 Motor 1
11 Pump Casing Unit 1 PP, PVDF
12 Discharge Pipe 1 PP, PVDF
121 Motor Mounting Screw 4 A4-70
122 Motor Mounting Washer 4 A4-70
123 Motor Mounting Spring Washer 4 A4-80
1312 Pump Cover 1 PP, PVDF
15 Shaft Bushing 1 Ceramic
151 Shaft Bushing O-Ring 1 NBR
161 Lip Seal 1 NBR, FKM
162 Shaft Sleeve 1 PP, PVDF
17 Elbow 1 PP, PVDF
18 Casing O-Ring 1 EPDM, FKM, FEP
193 Impeller O-Ring 1 EPDM, FKM, FEP
194 Impeller Screw 1 St45 H
20 Hose Clip 1 PP / A4
22 Plug 1 PP, PVDF
9… Impeller 1 PP, PVDF
Recommended Spares

Normally the CTI pump is maintenance free. However, depending on the nature & temperature of the liquid and the operating conditions of the pump, some parts are subject to wear and tear have to be replaced. We recommend having the following parts in stock:

PP & PVDF Pumps
Pos. Description Qty
161 Lip Seal 1
193 Impeller O-Ring 1
18 Casing O-Ring 1
15 Shaft Bushing 1
151 Shaft Bushing O-Ring 1

Additional information

Pump Sizes

25-9, 25-10, 25-11, 25-11.5, 32-8.5, 32-10, 32-12.5

Connection Size

,

Drive Type

Flow Rate

, , , , ,

Pressure

, , , , ,

Material

,

Self Priming

Solids Handling

Viscosity

You may also like…

X
preloader