Flow Meters

$1.00

FDA & 3A Approved Turbine Flow Meters

  1. - Available with 3/8” to 2” Tri-Clamp Connections.

  2. - Capacity range from 2.3 – 1510 l/min

  3. - Accuracy is +/- 1% of Reading & supplied with 5 point calibration (10 & 20 points on request)

  4. - Repeatability: +/- 1%

  5. - Developed for use in a wide variety of hygienic & pharmaceutical applications.

  6. - Suitable for COP & SOP (Clean & Sterilise Out of Place) and feature Stainless Steel AISI 316L housings & wetted parts with Nickle-Plated Stainless Steel Turbines and Tungsten Carbide Rotor Shafts.

  7. - Pressure Rating: 1’000 PSI

  8. - IP65 Magnetic Pick-Up

  9. - Fluid Temperature Range: -100ºC to +149ºC

  10. - Can be fitted with local display & amplifier on request


Hygienic Mag Flow Meters

  1. - Constructed with a Stainless Steel AISI 306 casing with PTFE Liner and Hastelloy C Electrodes as standard.

  2. - Available with DN10 to DN100 Connections, wafer, Tri-Clamp, DIN 11851 or ISO 2852 connections

  3. - Bi-directional

  4. - Accuracy: 0.3% with M1000 or 0.2% with M2000 amplifier >5m/s

  5. - Repeatability: 0.1%

  6. - Engineered for long lasting performance

  7. - No moving parts that wear and tear

  8. - Fitted with an LCD Display and Amplifier with various output and communication options (24V DC or 115/230V AC,) IP65 Protection Class (IP67 & 68 available on request)

  9. - Amplifiers display actual flow rate with 3 totalisers & status (min/max alarm, pre-selection, flow direction, empty pipe, error)

  10. - Fluid Temperature Range: -40ºC to +150ºC

Oval Gear Flow Meters

  1. - Only 2 moving parts

  2. - Suitable for both thin and viscous fluids

  3. - Available in sizes from ¼” to 4” - BSP, NPT, ANSI, DIN & JIS

  4. - Capacity Range: 0.5 l/hr to 1200 l/min

  5. - Available in Stainless Steel AISI 316 or Anodised Aluminium

  6. - ATEX approved

  7. - Max Pressure: 550 Bar

  8. - Accuracy: +/- 0.5%

  9. - Repeatability: +/- 0.03%

  10. - K-Factor: Typically 1000 Pulses / Min

  11. - Max Fluid Temp: 150ºC

  12. - Choice of 6 interchangeable display and pulse output modules

  13. - M-Lock Mounting System – quick & easy fitting of Pulsar or Local Display

Industrial Turbine Flow Meters

  1. - Capacity Range: 0.66 l/min up to 800 m³/hr

  2. - Connections: ½” – 8” (Threaded, Flanged & Hygienic)

  3. - Accuracy: 0.5% of Reading

  4. - Repeatability: +/- 0.2%

  5. - Max Pressure: 250 Bar

  6. - High quality Stainless Steel, PVC, PVDF, Nylon, Aluminium & Bronze Construction options

  7. - 5 Point Calibration

  8. - Intrinsically Safe: ATEX / CSA / FM Approved

  9. - 420 mA, Pulsed Output & Programmable Alarms

  10. - Maximum Fluid Temperature: 120ºC

  11. - Battery operated Display with 4 year battery life

Ultra-Sonic Clamp on Flow Meters

  1. - Non-invasive & non-contact flow meters which wrap around the pipe and use a transit-time to measure flow rates.

  2. - Available wall mounted, DIN Rail Mounted or Hand Held with rechargeable batteries, complete with carry case and affiliated accessories.

  3. - Can be supplied for pipe sizes ranging from 25 mm to 700 mm

  4. - Can also be supplied to measure both flow and temperature of the medium.

  5. - Can be mounted both horizontally and vertically

  6. - Accuracy: <1% of reading above 0.2 m/sec flow velocity

  7. - Outputs: Pulse, Alarm, 4-20mA. Mbus converter, Radio Pulse transmission and GSM/GPRS Telemetry / logging options on request

  8. - IP65 Protection (IP68 on request)

WRAS approved Multi-Jet Water Meters

  1. - Meter Body: Epoxy Coated Brass

  2. - Suitable for general & commercial water metering applications

  3. - Frost Resistant

  4. - Tamper Proof

  5. - Can be installed Horizontally and Vertically

  6. - Integral Particle Filter

  7. - Pulse Output options

  8. - Connections: DN15 to DN50 (Threaded & Flanged)

  9. - Capacity Range: 2.5 – 25 m³/hr

  10. - Pressure Rating: 16 Bar

  11. - Max Fluid Temperature: 50ºC

  12. - Max Reading: 99999.9999 m³

  13. - Min Reading: 0.05 Litres

  14. - Accuracy Class: B

WRAS Approved Waltmann Style Water Meters

  1. - Meter Body: Epoxy Coated Cast Iron

  2. - Suitable for Water Distribution & Industrial use

  3. - Removable Measuring Insert

  4. - Frost Resistant

  5. - Tamper Proof

  6. - Low Starting Flow & High Overload Capacity

  7. - Connections: DN50 to DN500, Flanged

  8. - Max Fluid Temperature: 50ºC

  9. - WRAS Approved, OIML MID certified Cl 2

Coriolis Mass Flow Meters

  1. - Capacity range from 10 – 1,000,000 kg/hr

  2. - Connection Sizes from 10 – 200 mm (Flanged, Threaded & Hygienic)

  3. - Max Operating Pressure of 240 Bar (model specific)

  4. - Characterised by incredible mass flow accuracy of +/- 0.1% of reading and ability to be used in even the most arduous and challenging of applications.

  5. - Fluid Temperature Range of -40ºC to +200ºC

  6. - Capable of measuring Mass Flow, Volume (+/- 1% accuracy), Temperature, Density & Pressure from one sensor

  7. - Work on the principle that the inertia excerpted by the medium causes the internal oscillating tube to twist proportionally to the mass flow rate.

  8. - Available in numerous types and sizes: Mico-Bend, Triangu

To Top