PTL Low Pressure Peristaltic Pump

The PTL Low Pressure Peristaltic Pump features a roller design which is highly effective for discharge pressures up to 4 Bar. The friction on the hose with rollers is lower which is why the hose needs to be lubricated by silicone grease. The rollers can be adjusted by brackets or shims depending on the pump size:

Moreover, our hoses last around 30% longer than any hoses on the market today, and are characterised by their non-machined external surface, a feature that enhances the lubrication of these reinforced hoses.

• Pump challenging liquids: Peristaltic Pumps are ideal for pumping highly abrasive, corrosive and viscous liquids containing particles
• Reduced downtime: Hassle-free maintenance and minimal downtime thanks to few components and no seals required
• Easy operation: User-friendly operation without the need for specialised personnel
• Cost-effective solution: Total cost of ownership for economical pumping solutions
• Turbulence-free performance: Smooth and gentle pumping even with highly abrasive or sensitive liquids, minimising wear and ensuring optimal operations
• Extensive configuration options: Customise your pump connection with a range of types and orientations
• Self-priming: Efficient self-priming with superior suction capacity up to -0.9 Bar
• Handling high viscosity: Reliable performance with the ability to pump liquids with viscosities up to 100,000cP
• Reversible operation: Versatile functionality for various applications with an easy change of rotation direction
• Adjustable flow and precise dosing: Flexibility in flow rates and precise dosing accuracy of approximately ±5% by adjusting the speed, such as with a frequency inverter
• Safe to run dry: Safe to run dry, eliminating the need or monitoring and ensuring ease of use and peace of mind

Technical Data	Specification
Casing Material	Aluminium
Hose Material (wetted)	Industrial reinforced – NR (std), NBR, EPDM, CSM ATEX reinforced – NR, EPDM Food grade reinforced – NR FDA, NBR FDA, EPDM FDA Extruded hose – Silicone
Insert Material (wetted)	AISI 316L (std), PTFE, HDPE AST, PP
Connection Type	Hose tail (std), EN1092-1 Flange, ANSI flange, BSP/NPT thread, Camlock, DIN 32676 clamp, DIN 11851 thread, SMS 3017 clamp
Motor*	IEC standard, 3-phase, 4-pole, 50/60 Hz, IP55+PTC
Max Capacity	5m3/h
Max Viscosity	12 000 cP***
Max Liquid Temperature	80 ºC**
Max Discharge Pressure	4 Bar (with reinforced hose)
Max Suction Lift	-0.9 Bar

*Other motor options available on request
**At a room temperature of 20°C. Furthermore, it depends on the pumped fluid and on the hose material
***Maximum value may vary depending on pump size and installation

Available Gear Motors:

Available Hose Materials:

• DPT Pulsation Dampener
• Hose Leak Detector (HLD)
• Built-In Frequency Inverter
• Revolution Counter (RC)
• Vacuum System
• Trolleys