Close Coupled Liquid Ring Pump (AISI316)

How does a Close Coupled Liquid Ring Pump work?

The star impeller rotates in the pump head with minimal clearances, creating a suction pressure that allows the transferring of the liquid from the inlet port into the suction chamber to the discharge chamber and then out through the discharge port.

• Self-priming up to 6m
• Capable of handling entrained gases
• Operate under low NPSH conditions
• Reversible and pulseless flow – Close Coupled units come with On/Off/Reversing Switches as standard
• Dry running for short periods of time
• Connection Sizes from 3⁄4” up to 3” in Industrial & Hygienic variants
• Flow Rates up to 900 l/min
• Heads up to 55m
• Available Bareshaft, Belt Driven & With Clutch (Manual & 12 / 24V), Hydraulically Driven, Long & Close Coupled & ATEX rated. 12, 24, 110, 230 & 400V Motors all available on request.
• A wide array of accessories such as carrying handles, trolleys, variable speed drives & batching systems

• Clear Fresh Water Transfer & Filtration Applications
• Sump & Tank Emptying
• Food Grade, Low Viscosity, Transfer Applications
• Wash-Down
• Portable Tank to Tank Transfer & Refiling
• CIP Scavenge

• Pumps fitted with a single-phase motor are equipped with a 2 m power supply cable & Schuko (Euro) Plug.
• Pumps fitted with a three-phase motor are equipped with a 4 m power supply cable with no plug and must be connected via a qualified electrician.

• Pump Body, Impeller & Shaft in Stainless Steel
  AISI 316
• Viton Lip Seal or Reversible Mechanical Seal in
  numerous materials of construction
• Connections in BSP M, BSP F, Garolla, DIN 11851,
  Macon, Tri-Clamp, SMS, BSM/RJT & Friederich
• Gaskets in Stainless Steel AISI 316, Guarnital/PTFE, NBR/Viton