V-Belt Drive Self Priming Flexible Impeller Pump

The GR Self Priming Flexible Impeller Pump is characterised by its belt-driven design where the motor is separated from the pump head and driven by a belt drive. When being used on particularly vicious or solids laden fluids the belt will slip to protect the motor from overloading.

The series can be delivered with either a baseplate or trolley mounted and with or without a control panel. The control panel features an on/off/reversing switch, which is fitted to the terminal box of the motor when a control panel isn’t supplied. Dry Run Protection can also be fitted to the pump head as well as Manual or Spring Loaded By-Passes.

• Self-priming up to 6m without the need for a non-return valve
• Pulsation-free flow makes this pump well-suited to shear sensitive fluids
• Can handle viscosities up to 50,000 cPs
• Solids handling up to 25mm (10mm for MINOR, 15mm for MAJOR and 25mm for MAXI)
• Reversible operation
• Wide range of impeller material options
• Multiple connection options available
• Pump head can be rotated and installed in various positions for added versatility
• Manual or spring-loaded bypasses available on request
• Single or 3-pahse motor options available

Max Flow (m³/hr)	43.8m³/hr
Max Pressure (m)	24m
Max Temperature (°C)	100°C
Max Viscosities (cPs)	Up to 50,000 cPs
Self-Priming	Up to 6m from dry

Voltages: 110, 230 & 400V (1 & 3 Phase)

Speeds: 300, 470, 600 & 700 rpm single & dual speed (235-470, 300-600 & 350-700 rpm)

Counter Connections: All pumps are supplied with Garolla Fittings as standard however a wide range of connection & counter connection types are available upon request.

• Control panel
• Bypass
• Barrel filling kit
• Carry handle
• Flow meters
• Dry run protection
• Pressure switch
• Level sensors
• Remote control
• Motor shroud