TU Pharmaceutical Air Operated Double Diaphragm Pump
The Tapflo TU Pharmaceutical Series of Air Operated Double Diaphragm Pump was developed in co-operation with one of the world’s leading suppliers to the bio-tech & pharmaceutical markets. It is USP VI compliant to meet with the most demanding of cleanliness standards. The pump housing only has 3 parts in contact with the fluid making it extremely easy to service and maintain and also vastly reducing the risk of contamination. This, coupled with the high surface finish and smooth internals which are made from inert materials, make this series a perfect solution for Bio-Tech and Pharmaceutical applications.
Thanks to Tapflo’s innovative, simple & ingenious design these pumps are compact, robust & reliable. Furthermore, they are quick & easy to maintain, keeping your service costs and process down time to an absolute minimum.
When used in conjunction with Tapflo’s patented control and monitoring equipment, preventive and routine maintenance is also easily integrated into any process, whilst also enabling accurate and precise control of the pump’s performance. Optimising your system to the best of its ability!
|Wetted Metal Parts||Solid Block PE HD1000 & Solid Block PTFE (USP VI Approved)|
|Diaphragms||PTFE TFM 1705b (USP VI approved)*|
|Valve Balls||PTFE, PTFE TFM 1635 (USP VI approved)*|
|Air Valve||Body: brass (standard), AISI 316L or PET, O-rings: NBR (standard), EPDM or FKM|
|Sealing (Wetted)||NBR, EPDM (USP VI approved)|
|Housing Pin Screws||A4-80|
|Diaphragm Shaft||Stainless Steel AISI 316L|
The Tapflo TU Pharmaceutical Air Operated Double Diaphragm Pumps have a wide range of capacities to suit almost any application, from metering and dosing to general transfer. The max capacity range varies from 60 – 570 l/min with discharges pressures up to 8 bar as standard & solids passage up to 15 mm.
|Max Capacity, l/min (*)||60||125||330||570|
|Volume / Stroke, ml (**)||74.5||238||793||1955|
|Max Discharge Pressure, Bar||8||8||8||8|
|Max Air Pressure, Bar||8||8||8||8|
|Max Dry Suction Lift, m (**)||2.5||3.5||4||4|
|Max Wet Suction Lift, m||8||8||8||8|
|Max Permissible ø of Solids, mm (Ball Valves / Flap Valves)||4||6||10||15|
|Max Fluid Temp in PE, ºC||70|
|Max Fluid Temp in PTFE, ºC||100|
|Min Fluid Temp, ºC||-15|
* = Recommended Flow is half that of the max flow, i.e. recommended flow for the TU53 is 30 l/min
** = This is max value with stainless steel valve balls, other valve ball materials may reduce the suction.
General Dimensional Information
NOTE: Build specific GA Drawings in 2D as well as DWG and STEP Files are available on request for easy integration into system installations and OEM products. Dimensions are in mm and based on standard build constructions.
Permitted Loads on Manifolds
We recommend not exceeding the following loads & forces reacting on the manifolds.