Filter Press Diaphragm Pump

As standard, the Pressure Booster is equipped with a pressure regulator and two manometers. Compared to a standard pump, our TF model is equipped with reinforcement plates and a special air valve with PET pistons. We also recommend using an aluminium centre body instead of the standard PP for enhanced durability.

This Pump Station for Filter Press Feeding is self-regulating, and no additional device for regulating the capacity is necessary. It is therefore a plug-and-play solution that’s mounted directly to the Filter Press. Simply connect the air and fluid pipework and you’re set. For monitoring the filling level of the Filter Press, stroke sensors, stroke counters, and flow meters are available.

Want to turn your existing Air Operated Double Diaphragm Pump into a TF Filter Press Pump? All you need are the following parts:

• 1 x Long Reinforcement Plate
• 1 x Short Reinforcement Plate
• 1 x Booster Mounting Plate
• 2 x Pin Screws
• 1 x Booster Complete Set

• Can dry run
• Self-priming
• High pressure transmission up to 1:2
• Fewer parts ensure this pump us easy to maintain
• Long service life
• Reliable and compact design meaning this unit can be mounted directly to the filter press

Drive Type	Pneumatic
Flow Rate	up to 570 l/min
Pressure	up to 160 meters
Material	Aluminium, Cast Iron, PE & PTFE, Stainless Steel AISI 316L
Self-Priming	Yes
Solids Handling	up to 15mm
Viscosity	0-200+ cSt

Technical Data: