Mobile Decanting Pump Systems for easy movement

 

What are the Mobile Decanting Pump Systems?

Mobile Decanting Pump SystemsThe Mobile Decanting Pump Systems MDU is a unit that combines a Tapflo air operated diaphragm pump with a Tapflo (UK) Pneumatic Batcher (BP), Pod valve and purpose designed trolley to accommodate 20L or 25L or 205 Litre chemical containers. The pneumatic batcher is a fully pneumatic predetermining counter system. It registers pump strokes via the air exhaust of an AODD pump, stopping the pump once the pre-set number of strokes have been recorded thus controlling the volume of product dispensed by the pump. The Mobile Decanting Pump Systems include a discharge lance with PoD valve and adjustable swan neck for dispensing directly into the points the chemical is required, thus removing the risk of operators carrying buckets of hazardous chemicals that are often in excess of the safe working weights.

Max Capacity:       50 l/min

Rated Capacity @ 4 Bar:        30 l/min

  1. MDU-20 System: Designed for 20 or 25 Litre containers
  2. MDU-200 System: Designed for 205 Litre Drums

Both systems features the following key components

  1. TPUK-BP Pneumatic Batch Controller
  2. T(X)50 PTT Air Operated Diaphragm Pump
  3. Pump Speed Control Blocking Needle Valve
  4. Air Filter & Pressure Regulator w. Gauge
  5. Stroke Sensitivity Adjustment Screw
  6. Discharge Hose with POD valve and Adjustable Swan Neck

The systems will dispense fluid from its on-board vessel and stop the pump automatically once the number of stokes recorded equals the number in the ‘pre-set value (pump strokes)’.  If stopped mid-batch the pump will stop immediately and the number of recorded strokes will re-set to zero. The batcher is also equipped with a loss of pressure automatic reset system. If the compressed air supply is removed the start/stop-push/pull valve will automatically reset to the ‘off’ position. The MDU-200 system also features a fill function which enables the operator to fill the on-board tank from a bulk container.

Feature & Benefits

MDU-20 Mobile Decanting System

  1. Removes the risks associated with carrying open containers of chemicals to the process
  2. Controls the amount of dispensed chemical preventing over dosing
  3. PoD valve prevents drips
  4. Easy to manoeuvre
  5. Designed to fit through a standard door
  6. Self braking when vertical
  7. Can be adjusted to suit differing chemical container neck positions
  8. Fully pneumatic
  9. Simple operation
  10. Integral hose stowage
  11. PoD valve improves accuracy due to minimal wet leg
  12. Broad media compatibility
  13. Stainless steel trolley construction
MDU-200 Mobile Decanting System

  1. Removes the risks associated with carrying open containers of chemicals to the process
  2. Controls the amount of dispensed chemical preventing over dosing
  3. Shepherd’ crook with integral NRV improves accuracy and minimises drips
  4. Fully  manoeuvrable
  5. Locking front wheels
  6. Fully pneumatic
  7. Simple operation
  8. Integral hose stowage
  9. Broad media compatibility
  10. Simple integral refilling system
  11. Top-plate and front legs can be removed to allow container to be replaced
  12. Stainless steel trolley construction
  13. Ideal for positioning next to the dosing point preventing the need for long chemical lines

 

 

MDU Dimensions

MDU-20

MDS20

Designation Dimension
A 580 mm
B 900 mm
C 445 mm
P (Air Supply) ¼” BSPP F

 

 

 

 

 

 

 

 

MDS200

Designation Dimension
A 830 mm
B 725 mm
C 1330 mm
Air Supply ¼” BSPP F
Suction Valve Fill Port ½” BSPP F

 

X
preloader